| |
 |
 |
 |
|
H7 Adaptor with Philips bulbs |
June 20, 2011 |
| Reviewer:
Philip Ashton
from Sylvania, NSW Australia
|
|
I found that when fitting the H7 adaptor to the Philips bulb, as supplied in the Xtreme kit, that the rubber seal around the wires exiting the bulb prevented the adaptor to sit flush against the collar of the bulb. I needed to modify the wiring slot to accommodate the extra thickness of the wiring seal to enable the fixing spring clip to lock the bulb into position.
Was this review helpful to you? 
|
|
 |
|
 |
|
